Fu-se Vacuum Forming is a highly creative company, having both software and hardware technologies of 3D surface decorative forming, vacuum forming and pressure forming.
Thermoforming software and hardware Fu-se Vacuum Forming Ltd. 布施真空のホームページ To Japanese site
HOMEForming TechnologyPrinciple of Next Generation Technology "NGF Forming"
3D Surface Decoration

Next Generation Technology "NGF Forming"

Next Generation Technology "NGF Forming"
Airproof box has been introduced to improve vacuum pressure forming! We create a vacuum environment and then introduce atmospheric pressure to add pressure for forming.In recent years, interest in environmentally-friendly manufacturing has grown in the industry. In response, FVF has developed Next Generation Technology (“NGF Forming”) based on our many years of accumulated vacuum forming technology. NGF Forming is an advanced forming process vs. conventional Vacuum Forming and Pressure Forming. Utilizing air-proof boxes (chambers), cavities and holes in the mold are no longer needed. That not only reduces mold cost, but also allows forming of the decorative finish directly onto the part.

Features of Next Generation Technology "NGF Forming"

Features of Next Generation Technology "NGF Forming"
●Heat loss is low and thermal efficiency is high because it heats in an air-proof chamber.
●A very stable molding condition can be achieved because it is not affected by the external environment.
●No holes for vacuum are required in the mold.
●A molded component can be used in place of the mold, allowing the finish to be applied directly onto the part.
●Either side of an injection molding tool can be used to form the sheet; prototype sheets can be formed as well.
●Equipment structure is simple and compact.

Specifications of Next Generation Technology "NGF Forming"

Principle

Create a vacuum environment, then introduce atmospheric pressure to conduct pressure forming

Features

Reproduce the heating situation which is not affected by surrounding temperature

Film can be kept horizontally by the subtle differences of pressure

No vacuum hole is needed

Effect Method

Film forming in high temperature and narrow temperature range

Forming with film pre-printing

Injection forming mold is available

Product

High-performance engineer plastic including PC

Formed product of matching pattern and character

Products made by no-hole mold

Features and effects of Next Generation Technology "NGF Forming"


Back to Top 上に戻る

Principle of Next Generation Technology "NGF Forming"

Principle of Next Generation Technology "NGF Forming"
Principle diagram 次世代成形法「NGF成形」の原理
Back to Top 上に戻る

2-side Vacuum Forming Machine (NGF Model)

2-side Vacuum Forming Machine (NGF Model) 詳細ページ
Image of NGF ●Max frame inner dimension: 700×950mm
●Frame air cylinder driven
●Top box hydraulic cylinder driven
●Bottom table hydraulic cylinder driven
●加Heater Near-infrared heater
●With sheet surface temperature measuring device
●Compressed air pressure 0.2Mpa
●Total electric capacity 24.1 kW
Back to Top 上に戻る
Forming Technology
HOMEAbout UsForming TechnologyForming MachineryUsed Forming MachineryForming ProcessMaterial ProcurementInquiriesSitemapPrivacy Policy

Fu-se Vacuum Forming Ltd. 2-103 Komagatani, Habikino-shi, Osaka TEL:072-958-1401 FAX: 072-958-3125
Copyright (C) 2011 Fu-se Vacuum Forming All Rights Reserved